HOME > Products > Super Glue > High Performace Super Glue

High Performace Super Glue

High Performace Super Glue

High performance series cyanoacrylate adhesives are instant bonding, single component adhesives, that bond almost all close-fitting smooth surface in seconds. It requires no mixing, no heating, no clamping. These adhesives contain no solvent, have low toxicity, mild odor and non-flammable.

GRADE
       F-SERIES
  FAST SETTING VELOCITY SERIES
       W-20

Fastest setting velocity for wood work / plastic / rubber / metal.
       FV-50

Quick setting velocity & viscosity (50 cps) for wood work and porous surface.
       FV-100

Quick setting velocity & viscosity (100 cps) for wood work and porous surface.
       FV-300

Quick setting velocity & viscosity (300 cps) for wood work and porous surface.

       FV-1500

  Quick setting velocity & viscosity (1500 cps) for wood work and porous surface.
       F-GEL

Surface insensitive thixotropic gel for plastic / rubber / metal can be applied on vertical & porous surfaces, will not migrate & can be cured with EVOBOND Activator.
 M-SERIES
  MEDIUM SETTING VELOCITY & HIGH STRENGTH 
       W-50
Quick setting velocity for plastic/ rubber/ metal.
       V-50
 Medium setting velocity & viscosity (50 cps) for plastic / rubber / metal.
       V-100
Medium setting velocity & viscosity (100 cps) for plastic / rubber / metal.
       V-300
Medium setting velocity & viscosity (300 cps) for plastic / rubber / metal.
       HV-15
Medium setting velocity & high viscosity (1500cps) for plastic / rubber / metal, can be cured with EVOBOND activator.
       GEL
Thixotropic gel for plastic / rubber / metal can be applied on vertical & porous surfaces, will not migrate & can be cured with EVOBOND activator.
       W-70
 Medium setting velocity general purpose. Very long shelf life and filling in 2g PE tube for consumer market. 
       V-50AL
Medium setting velocity & viscosity (50 cps) for general purpose. Very long shelf life and filling in aluminum tube blister on card, specially for consumer market.
       K-2
 Low whitening/ low blooming and medium setting velocity.

Specification
General Properties
W-20 FV-50 FV-100 FV-300 FV-1500 F-GEL W-50 V-50 V-100 V-300 HV-15 GEL W-70 V-50AL K-2
Main Component
Ethyl Cyanoacrylate
Viscosity (25ºC)CPS
2-3 50 100 300 1500 Thixo Gel 2-3 50 100 300 1500 Thixo Gel 2-3 50 2-3
Gap Fill (mm)
0.04 0.06 0.1 0.15 0.20 1 0.04 0.06 0.1 0.15 0.2 1

0.04

 0.06 0.04
Shelf Life (Month)
6 6 6 6 6 6 12 12 12 12 12 12 14 14 10
Setting Time (Sec.)
5 15 15 15 15 20 10 20 20 20 30 30 15 20 15
Temp. Range (¢XC)
-55 to 82¢XC
Full Cure Time
24 Hr
Tensile Shear Strength kgf/cm2           
120-160 120-160 120-160 120-160 120-160 180-220 150-200 150-200 150-200 150-200 150-220 180-220 150-200 150-200 150-200
Solubility
Soluble in Acetone, DMF & Debonder
Appearance
Colorless Transparent Liquid